m4 trigger mechanism

[BALBOSA]

hey guys just need to know if you can get separate parts of the trigger mechanism i (rather foolishly) broke the little spring off that pulls the trigger back =/ how would i get a new one? does zeroin do them?

[Boo-Sabum Ben]

You have pm!

[euf0nia]

Re: m4 trigger mechanism

You cannot, but there are spring set of different brands!

[BALBOSA]

Re: m4 trigger mechanism

i think i haven't been too clear i meant i broke the notch off that held the spring =/

[Boo-Sabum Ben]

Re: m4 trigger mechanism

so is it a trigger you need or the spring or both?

[BALBOSA]

Re: m4 trigger mechanism



right this is the best way i can explain it ive highlighted the bit thats broken if you look at the smallest pic its the little bit of plastic the spring rests on thats what i broke

[Boo-Sabum Ben]

Re: m4 trigger mechanism

Ah, in that case all I have is the trigger itself and a spring that wraps around behind it. wont be able to help you im afraid!

[BALBOSA]

Re: m4 trigger mechanism

noooooo haha no worries dude thanks for trying :D

[LazyMcCrazy]

Re: m4 trigger mechanism

http://www.zerooneairsoft.com/produc...oducts_id=2993

OR

http://www.zerooneairsoft.com/produc...oducts_id=2992


OR the exact part (dont know if it will fit)

http://www.zerooneairsoft.com/produc...oducts_id=2941

[North West Outpost]

Re: m4 trigger mechanism

You need a trigger slide. If you send me £1.50 to cover postage I can send you a second hand one. Not new but is good second hand condition. Should be fine.

[BALBOSA]

Re: m4 trigger mechanism

http://www.zerooneairsoft.com/produc...oducts_id=2993

OR

http://www.zerooneairsoft.com/produc...oducts_id=2992

nice one matey your a diamond! its just that little bit of plastic i need typical huh?

[BALBOSA]

Re: m4 trigger mechanism

LazyMcCrazy your a genius!! thanks allot for all the help guys :D