ultimate gearbox m120 and Systema High speed motor

[musherz]

Recently bought a Systema High power motor, and now i have to get a new gearbox or it will currently shred the one i own :/ Do you reckon a ultimate gearbox m120 will be able to withstand a systema high power motor?

[euf0nia]

Re: ultimate gearbox m120 and Systema High speed motor

Recently bought a Systema High power motor, and now i have to get a new gearbox or it will currently shred the one i own :/ Do you reckon a ultimate gearbox m120 will be able to withstand a systema high power motor?

With which battery you will run it?

[HuntR]

Re: ultimate gearbox m120 and Systema High speed motor

I think the gearbox will kill the motor. The high speed systema's have poor torque. So the M120 spring will be too much for it. I won't break right away. But it won't last anywhere near as long as it should.

Also are you planning to leave the gearbox stock. As the M120 is hot for 99% of sites. Unless locked to Semi.

[musherz]

Re: ultimate gearbox m120 and Systema High speed motor

Planning on running it on a 8.4v but if you think i can get away with a higher one then could you say what would be good please?

Right.... what if i put my current stock spring in? i think its a m90 or m100 not quite sure

[euf0nia]

Re: ultimate gearbox m120 and Systema High speed motor

With an 8,4V you can run easily with every gearbox, I guess you can go up to 9,6V or 7,4 Li-Po without any problem.

[HuntR]

Re: ultimate gearbox m120 and Systema High speed motor

With an 8.4v and M90/1joule/M100 you'll be fine.

[musherz]

Re: ultimate gearbox m120 and Systema High speed motor

okay thanks very much guys :D