NewG&P hop what nozzel?

[knarf3]

Going to fit a G&P hop up to my Dboys KAC PDW but the stock air nozzel does not fit the hop so do I need a G&P nozzel?

Also what wire do I need to use to rear wire the gun must be able to handle 7.4v lipo's.

Any other tips for the job would be great.

Cheers :D

[richardy]

Re: NewG&P hop what nozzel?

if the pdw has a standard m4 hop unit, then it should fit just fine.

[North West Outpost]

Re: NewG&P hop what nozzel?

Wire wise either 16awg, thicker or 18awg. The 16 is better at what it does due to being thicker and therefor less resistance. But if you are not looking to max out the rof, 18 will be fine and easier to fit.

[knarf3]

Re: NewG&P hop what nozzel?

if the pdw has a standard m4 hop unit, then it should fit just fine.

Been told ths stock hop is an M4 but as I said the air nozzel does not fit in the G&P hop up.

[johnnyj]

Re: NewG&P hop what nozzel?

it should fit but knowing dboys anything is pos , i cant remember having any probs with my pdw like that whats the size of the nozzel if you can measure it

[knarf3]

Re: NewG&P hop what nozzel?

it should fit but knowing dboys anything is pos , i cant remember having any probs with my pdw like that whats the size of the nozzel if you can measure it

Will have a look at it tomorrow and get back to you. but im thinking deep fire or g&p air nozzle and see where that takes me.