Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Deans to mini tamiya?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Deans to mini tamiya?

    I'm looking at buying a gun off the forum atm, however it has deans connectors and i've only got mini tamiya batteries, it is an SRC G36E gen III.

    How much of a problem is it going to be to get the gun using tamiyas? And what would be the best way of doing so
    Originally posted by tyler
    Quote:
    hit them then from another angel
    Originally posted by murta369
    gabriel perhaps?

  • #2
    Re: Deans to mini tamiya?

    Deans to mini tamiya connector would be easiest.

    Comment


    • #3
      Re: Deans to mini tamiya?

      either get an adaptor from somewhere or crimp some tamiyas on or solder some deans onto your batteries


      Linky here>> http://airsofttutorials.com

      Comment


      • #4
        Re: Deans to mini tamiya?

        if it says that it has been converted to deans
        will it only be the part where the battery is attached?
        I know that in a G36 the wire from the battery to the motor is more than one wire attached around the magwell area, so would I only need to change the connector at the handguard? and will I want a male or female bit for there
        Originally posted by tyler
        Quote:
        hit them then from another angel
        Originally posted by murta369
        gabriel perhaps?

        Comment


        • #5
          More than likley unless its been rewired by the previous owner too.

          If that is the case just have a certain online electical supplier make up the lead to replace the front section of the wiring.

          Comment


          • #6
            Re: Deans to mini tamiya?

            Would be better for you to find someone local with a soldering iron and a few deans connectors to change your batteries to deans.

            Shouldn't cost more than a couple of pints for a few connectors to be changed I wouldn't think.
            Gun tech.

            AIRSOFTERS.........Load of Balls.!

            http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

            Comment


            • #7
              Re: Deans to mini tamiya?

              thing is i'll need to get a charger for it, atm i'm sharing one with my friend and he's on large tamiya
              is there any benefit in deans?
              Originally posted by tyler
              Quote:
              hit them then from another angel
              Originally posted by murta369
              gabriel perhaps?

              Comment


              • #8
                Re: Deans to mini tamiya?

                Yes deffinatly. They are much better, they allow the current to flow better and the gun will perform better.

                You could then get a lead to go from your batteries to the charger, which would make better sence than the other way round.

                Just ask anyone who has switched from Tamyias to deans what they think.
                Gun tech.

                AIRSOFTERS.........Load of Balls.!

                http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

                Comment


                • #9
                  Re: Deans to mini tamiya?

                  I switched from Tamiyas to Deans, certainly a much improved ROF every gun i'v ever owned. It'll make 8.4v's actually useful if you like high fire rates.

                  I mainly switched because my friend has about 20 batteries all on deans and i rely on him if my batts run out. It costs hardly anything to buy a bag off Ebay, then you can just make a connector for your charger. ********* **** sell everything you'll need to change to deans.

                  Comment

                  About the Author

                  Collapse

                  Daredevilxp9 Find out more about Daredevilxp9
                  Working...
                  X