stripping an M4

[sickboy76]

Can someone link me to the thread showing how to tak part an M4 primarily removing the outer barrel from the upper receiver.

many thanks

[Caveira]

Re: stripping an M4

http://www.mechbox.com/

[sickboy76]

Re: stripping an M4

Cheers robin unfortunately that wasn't very helpful for information on removing the outer barrel.
my gun is in bits at the moment but i can't get the delta ring of my KA casv-m, Do i need to remove the serrated barrel nut in order to get off the delta ring or does the delta ring come off first?

If so is there any way to remove the nut with out shelling out for the armourer's tool ?

[critic]

Re: stripping an M4

buy the tool. cus you will need to tighten it back up.

[Caveira]

Re: stripping an M4

A plumbers wrench (the type with the plastic coated grips for use on plastic pipe) will do the trick perfectly.

Most DIY shops will have one.

[sickboy76]

Re: stripping an M4

Got myself a pair of grips from homebase but still can't work out which way i'm mean't to be breaking the thread, is it ccw like the flash hider thread or is it cw tighten and loosened as normal?

[blytm]

Re: stripping an M4

Should be normal CW off the body

[sickboy76]

Re: stripping an M4

cheers buddy