Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

A&K M249 mag problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A&K M249 mag problem

    Hi. Hoping for some help here. I have a box mag for the minimi and it doesnt seem to feed into the weapon. Bb's do move up the spring tube but dont feed into the 'chamber' of the gun. And keeps dry firing . . Any help please.. . . Thanks M.

  • #2
    Re: A&K M249 mag problem

    Do the bbs spring out of the tube when you move the little notch in the mag piece, the bit you move out the way to release the bbs. I forget what it's called. If they don't spring out then it is jammed, if they do then it will be a problem in the magwell. Do standard M4 mags feed?
    TK Airsoft- Take one "from" the team

    Army Armament L85A1
    Tokyo Marui P90
    HFC M9 Special Forces
    KSC Glock 18c

    Comment


    • #3
      Re: A&K M249 mag problem

      Is it the standard A&K boxmag?
      Originally posted by Nun-Chuck
      I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
      Originally posted by deanfirst
      why not use zeroone's escort service?

      Comment


      • #4
        Re: A&K M249 mag problem

        Sounds thick but is the feed block in the whole way?


        Comment


        • #5
          Re: A&K M249 mag problem

          Yeah, check that, they can be a bit funny with it fitting in the magwell. Also, have you had the barrel out?
          Originally posted by Nun-Chuck
          I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
          Originally posted by deanfirst
          why not use zeroone's escort service?

          Comment

          About the Author

          Collapse

          BB COMMANDO i Love airsoft Find out more about BB COMMANDO
          Working...
          X