TM G3-SG1 scope mount?

[triggerhappy12]

Hi,

Ok this may seem like a pretty basic problem for all those who have or used to have TM G3-SG1's But i just cannot seem to figure it out!

HOW DO I GET A SCOPE ONTO THE GUN?
-do i need to get a rail for it and if so what type of rail and where from?
-or do i need a special type of scope mount and again if so where from?

If you can help me out i will be extremely grateful!!

Thanks

[FryFubar]

Re: TM G3-SG1 scope mount?

Since the G3/Sg1 doesn't have a 20mm rail, it's not as simple for mounting scopes. First of all, it would be useful if you told us what scope type you want to use.

If you don't know what scope to use, then you need to ask yourself that question first since it will dictate your mounting.

Anyway, for any scopes that uses a 20mm rail (Acog, holosight ect..) all you'll need to get is a mount with a 20mm rail.

For a traditional scope/optic, you'll need to get a mount and then some scope rings.

[FryFubar]

Re: TM G3-SG1 scope mount?

Infact, heres some stuff I pulled off the zerooneairsoft site

http://www.zerooneairsoft.com/erol/erol.html

Lo-pro Mount with 20mm rail: Product Code: G-03-060
Scope rings for 20mm rail: Product Code: RB01
Aimpoint mount (30mm scope) for 20mm rail: Product Code: HE-MT-04

Hope that helps

[triggerhappy12]

Re: TM G3-SG1 scope mount?

Cheers buddy! thanks for the advice greatly appreciated!!