improving the accuracy of my ICS m4 please help

[Jut]

As a reletive airsoft newbie I was hoping some of you veterens could shead some light on what are the best ways to improve my AEG's accuracy as it tends to drift off to the left after 30mtrs or so, I was thinking about installing a Systema presision barrel to start with, any thing else I should consider? Iys currently running 340fps so don't really wanna increase that too much if I don't have to

Ideas greatly accepted

Thanks guys

[windwalker]

Check the hop rubber as that is what will affect the trajectory of the bb also make sure your barrel is clean.

[Fuzzy]

Re: improving the accuracy of my ICS m4 please help

Windwalker pretty much hit it. Give the barrel a clean before you do anything before you look at the hop though.

How many shots have you put through the gun (to the nearest 5,000)?

[Jut]

Re: improving the accuracy of my ICS m4 please help

I've got it second hand, but I've changed the hop rubber to a G & G all weather on and replaced the hop up unit (ICS original one same as what was already in it)

Looking down the barrel there are lots of white marks

I've fired about 10,000 since those upgrades


Its a 2006 anniversary model so I guess its fired bucket fulls more than that in its time

Thanks guys

[Tiercel]

Re: improving the accuracy of my ICS m4 please help

Well theres your problem, clean the barrel!!!

[private parts]

Re: improving the accuracy of my ICS m4 please help

Also use .25 ammo if not already