Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

back wiring help

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    back wiring help

    hey quys recently i have acsadently cut the wire for my CA hk33 and was wondoring would this wire be ok to replace it? http://www.zerooneairsoft.com/produc...oducts_id=3239
    the battery it uses is a large tymaie conector but the conect to the gun (past the stock) with a small tanmi conector

    help ?

    cherz

    sam
    Last edited by Samaham C; 28 May, 2011, 21:35.
    Samaham C
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: back wiring help

    Yep that should work. It has a large connector to connect to the battery and a small connector to go into the gun.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: back wiring help

      yeah that is what i was hoping thanks
      Samaham C
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: back wiring help

        thanks guys this is all sorted now
        Samaham C
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        Samaham C My Name Is Sam Find out more about Samaham C
        Working...
        X