M4- convert to M16

[Guy-W]

Hi folks, Im not quite sure where to have posted it, so I thought I'd just post in the genreal area,
Im wondering now what didfrent things will need to convert an M4 into an M16.?
I have bought an AGM M4A1 Gasblow back, and Im not a fan of M4's, I was wondering wat types of front ends will be needed to convert it to and M16A4
, apart form a hollow out M16 stock to go over the recoil buffer tube, would any Ics front ends do? or would I need something more specific?
cheers for any help,
Guy

[Barny Hamon]

Re: M4- convert to M16

Aside from this should be in the tech section, you need a specific WA style/compatible front end, i think G&P do one but im not sure on that. Standard AEG ones will not fit.

[Guy-W]

Re: M4- convert to M16

ahh, thats a shame, it looks similar , very similar to my friends, CA M4.
I just asssumed the AEG parts were compatible. :/

[johnnyj]

Re: M4- convert to M16

i have seen on another forum a chap had made an AEG barrel fit the wa m4 by modding it to fit the hop unit , but even if you do this your stuffed as the g&p/wa full stocks buffer tube will not fit the agm body