Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

ROF issue confused...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    ROF issue confused...

    Hi gents i have a old ics m4 with the standard ics turbo 3000 motor in it im a bit puzzled as to why im getting the same rof on a 9.6 battery to a 12v?? (getting 14rps on a 9.6 and 15rps on a 12v) gun as a whole runs fine nothing getting hot or sounding bad in anyway was just wondering if someone smarter than me had any idea's to why this is? maybe the motor's on its way out?
    cheers in advance.
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: ROF issue confused...

    on the higher battery, is it miss firing, like only shooting 1 to 2 cycles of the gearbox ?
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: ROF issue confused...

      Don't take my word for it but could it be the anti reversal latch slipping?
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: ROF issue confused...

        Originally posted by generalbaxter View Post
        on the higher battery, is it miss firing, like only shooting 1 to 2 cycles of the gearbox ?
        nope fuctioning perfectly just slow for some reason
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: ROF issue confused...

          the motor may only be drawing 10v from the battery as it will only take what it needs try a higher mah
          Originally posted by jonfox94
          will it be possible for me to buy this if i 2 tone it upon delivery ? i will also pay any postage fees
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          • #6
            Re: ROF issue confused...

            Originally posted by fallout3021 View Post
            the motor may only be drawing 10v from the battery as it will only take what it needs try a higher mah
            This^ motors only draw what they need voltage wise.
            sigpic
            • Thank the user for this post 0
            • Like this post 0
            • Dislike this post 0

            Comment

            • #7
              Re: ROF issue confused...

              change connecters if still using tamiya
              • Thank the user for this post 0
              • Like this post 0
              • Dislike this post 0

              Comment

              • #8
                Re: ROF issue confused...

                Better still ditch the motor, use some decent 16awg wire, deans or XT60 connectors.

                Even better ditch the ics....I dont like them for high speed with the split gear box.
                Gun tech.

                AIRSOFTERS.........Load of Balls.!

                http://forums.zeroin.co.uk/showthrea...r-Offizier-M41
                • Thank the user for this post 0
                • Like this post 0
                • Dislike this post 0

                Comment

                • #9
                  Re: ROF issue confused...

                  Originally posted by JOE90 View Post
                  This^ motors only draw what they need voltage wise.
                  No, they only draw what they need current wise, i.e. Amps... the potential difference across the motor will be the same as the battery's voltage.

                  What make/size are the batteries? A good, lower voltage battery will give a better rate of fire than a rubbish higher voltage one; similarly, a small higher voltage pack may be unable to cope with the motor's demands.
                  Others till I die
                  • Thank the user for this post 0
                  • Like this post 0
                  • Dislike this post 0

                  Comment

                  • #10
                    Re: ROF issue confused...

                    thanks guys it waas the motor. dropped in a g&p m120 is fine now
                    • Thank the user for this post 0
                    • Like this post 0
                    • Dislike this post 0

                    Comment

                    Previous template Next

                    About the Author

                    Collapse
                    tsv2tuff Find out more about tsv2tuff
                    Working...
                    X