AGM M4A1 AEG gearbox

[MasterGouken]

I'm having trouble getting the gearbox out. I have the stock tube off, the mag release out, the middle pin above the trigger out and the rear hex bolt out from near the stock tube. I believe it should open up hinging on the other hex bolt at the front next to the ris grip but it wont budge.
I tried taking the front hex bolt out but still no joy.
Any help please?

[random-guy]

Re: AGM M4A1 AEG gearbox

try setting the fire selector switch inbetween safety and semi then slide the GB out

[MasterGouken]

Re: AGM M4A1 AEG gearbox

heres where im up to


i tried moving the safety to that position but it wont budge at all

[johnnyj]

Re: AGM M4A1 AEG gearbox

remove the front pin and pull

[random-guy]

Re: AGM M4A1 AEG gearbox

alright you want to take the top reciever off, undo the hex bolt and slide it off

[MasterGouken]

Re: AGM M4A1 AEG gearbox

Its a hex head screw that goes into a metal tube that goes from the other side of the aeg right through. The screw part comes out but not the tube part!?

[johnnyj]

Re: AGM M4A1 AEG gearbox

take a thin screw driver and knock it out ( tapping )

[random-guy]

Re: AGM M4A1 AEG gearbox

once you tap it out slide the top half off

[MasterGouken]

Re: AGM M4A1 AEG gearbox

that did the trick, thanks. It was in there pretty tight lol

[random-guy]

Re: AGM M4A1 AEG gearbox

lol no prob