TM G18c AEP problem

[wilko129]

Hi guys i recently took apart my glock 18c to change the barrel and clean it and i realised that my hop up nub (i think its called that) is not there. Although i am not too good at upgrading guns i am fairly sure there should be a little cylinder shaped rubber bit which pushes against the hop up rubber when the hop up is adjusted, which i undertsand to be the hop up nub. So basicaly i was just wondering if this is quite correct and if there is anywhere i can buy this from or mabye even the nub and the rubber if thats easier. Sorry i can get no pictures up at this time but i can try and explain it better if needed.

Thanks in advance Nick

[richardy]

Re: TM G18c AEP problem

they dont have them on aeps.

[wilko129]

Re: TM G18c AEP problem

Oh well i can see a place where it looks like it should go because its rounded to the right shape. What pushes the hop up rubber on AEPs then are they just pushed by plastic?

[wilko129]

Re: TM G18c AEP problem

In fact i can kinda remember it having one when i took it apart before, or mabye i am imagining things

[wilko129]

Re: TM G18c AEP problem

Any ideas guys i cannot find any more info on the internet and i would quite like to be able to sell this?

[richardy]

Re: TM G18c AEP problem

ive already answered this, it doesnt have one. look in your parts manual..

[wilko129]

Re: TM G18c AEP problem

ive already answered this, it doesnt have one. look in your parts manual..

ok so is the rubber just pushed by plastic?

[richardy]

Re: TM G18c AEP problem

yup

[wilko129]

Re: TM G18c AEP problem

yup

ok thanks mate worry over :D