G3 SG1 questions

[joshh1512]

Re: G3 SG1 questions

So basically if i get one with a longer barrel- there's not much i can do, so i'd be better off going for the shorty?

And can anyone let me know the dimensions of that silencer roughly?

Cheers dan.

[Dan_s]

Re: G3 SG1 questions

Pic1 - G3 with fixed SG1 stock and rear wired
Pic2 - G3 with stock removed showing cable extension
Pic3 - G3 with wiring to the front disconnected
Pic4 - G3 with rear cable extension and front cable
Pic5 - G3 with connector from gearbox and front power cable

[joshh1512]

Re: G3 SG1 questions

That;s confused me lol, so how did you get the wiring so it can be either front or rear?

[Dan_s]

Re: G3 SG1 questions

Pic1 - G3 with front power cable and fuse box
Pic2 - cable extension
Pic3 - G3 with mp5 style end cap fitted and power cable connected to front

[HunterAndy]

Re: G3 SG1 questions

have two connectors wired up with a junction, so at some point the red wire splits and the black wire splits i'd have thought

Run the first split to the rear, second to the front or vise versa.

[Dan_s]

Re: G3 SG1 questions

basically run the cable extension in pic2 to the front of the gun above the gearbox and just connect up the wires according to the configuration you want i.e to the front or when you attach the stock. it's quite simple when you actually have the g3 in front of you it'll make more sense

hope that helps

[joshh1512]

Re: G3 SG1 questions

Yeh thanks alot for the help mate, will be contacting you once i get the gun! My g3 will be having a bigger front end compared to yours, i guess it will be easier for me to fit a bigger battery into it , and to make it easier those small bannana plugs i think they're called may be easier to use, like what i have on my pdw...

So you just run a cable over the top of the gearbox right?

and it wouldn't get in the way of a sliding stock or anything?

thanks!

[Dan_s]

Re: G3 SG1 questions

the wiring wont affect the sliding stock at all as the end cap fits over the wiring and the sliding part of the stock is on the outside you could use either a stick battery or an m4 stock lipo is probably the better option. With the wiring, you may need to take most of the gun apart to ensure the cabling is as snug as you can get it.

no worries just drop us a pm when you get your g3 and we can be g3 buddies haha

[Dan_s]

Re: G3 SG1 questions

my challenge is to get my g3 looking like that tomorrow - btw the barrel extension is about 2.5 inches - i dont have a ruler

[Dan_s]

Re: G3 SG1 questions

Challenge accepted

Left - original
Right - my SG-1

had to get the right hex key to remove the grub hence the week delay