M733 help!

[Bad Karma]

Just got one of these today, g+p, but can't find a tamiya connector anywhere, anyone able to help? It's not in the front guard so does that mean a stock tube lipo Job? I'm worried about opening he body incase it breaks.

[Caveira]

Re: M733 help!

This should be front wired.

Was it new?

[CHIFF_MoA]

Re: M733 help!

It's my understanding that they are now rear wired for a stock tube lipo. I bought one last October that was front wired, however I started reading reports about lipo's in the back soon after. Whichever type it is you will need a tiny lipo, as the handguards are real-steel sized (unlike the TM one). Mine fires very well on a 7.4v 25c 1200Mah battery, which just fits into the handguards.

[Bad Karma]

Re: M733 help!

Its a brand new one.

Oh okay. I'll have to open it up inside then I think.

[Caveira]

Re: M733 help!

Try popping the stock tube end cap off and having a look. Either that or just pop out the body pin/s and slide the top off.

[Bad Karma]

Re: M733 help!

Any way of doing that? It's not got an Allen key like the normal ones .

[Caveira]

Re: M733 help!

Mmmmmmmmm

Nothing there at all to undo?

Any chance of getting a picture up?

[North West Outpost]

Re: M733 help!

Can't you just lift the wrong end of the opening lever and take the stock off????

With the stock fully in the end of the tube undoes anti clockwise and in there you will find the mini deans.