M14 problem

[nyal]

hi guys, not really sure on this one so any advice would be appreciated.

Ok just replaced my hop unit and just test fired it with a new battery and for the first few rounds was fine but then I smelt burning, so iv just taken it apart and the motor seems hot, strange as is has only fired no less than 8 shorts, just tried it again and I all I get is a clunky click noise????

I think it's my motor fried, but more advice would be great.

thanks

[Tom Andrews]

Re: M14 problem

Try removing the motor from gearbox and then trying . Check the switch contacts on the outside of the box.

Try releasing the anti reversal latch inside the gearbox or rotating the gears with a screwdriver.

[nyal]

Re: M14 problem

thanks tom that was spot on with the prolem exept I fried my motor in the process but all is sorted now thanks for your help