ICS -> TM Stock Tube

[Shinotama]

Hey guys, had mixed messages from people, is it possible to change a ICS into a TM stock tube?

The question I ask is because I am wishing to fit a CTR or MOE Magpul stock onto my ICS M4 and I know they work with TM...

[johnnyj]

Re: ICS -> TM Stock Tube

from what i know of the ics body/stock you can not change the tube over but have you looked about to see if the magpul stock will go on your tube ?

[ejtrent]

Re: ICS -> TM Stock Tube

I had a magpul stock on an ICS tube, fitted perfectly

[Alfer]

Re: ICS -> TM Stock Tube

ics stock tubes are very similar to the dimensions of the real stock tube,

[Shinotama]

Re: ICS -> TM Stock Tube

from what i know of the ics body/stock you can not change the tube over but have you looked about to see if the magpul stock will go on your tube ?

Unfortunatly I don't have one near me to test it on, its like £50 to "find out" lol...

Thanks though, as for ejtrent, thanks =D

[Oli]

Re: ICS -> TM Stock Tube

best bet is to use the ics stock tube,

if you don't want to / can't

then you need to modify the shape, with girth etc. of the rails on the stock adaptor to match the stock.

any rotary tool or good file will do

[Shinotama]

Re: ICS -> TM Stock Tube

best bet is to use the ics stock tube,

Turns out most of the stuff will work anyway lol...

Thanks guys