ics m4 electrical problem

[gezer]

ok so my guns working (it wasnt before)
it was an electrical problem (connectors to motor were buggered)
now the wires are solered directly to the motor
it fires nicely when on lower half but when i put the top half on it screetched loudly after two screetches it was firing ok and no screetching since
also when i pull the trigger sometime it wont fire and the only way it will is i have to take the grip (bottom of grip) off and it'll make a little szj sound

so what was the screetching and whats the other problem
thanks

[billy breach]

Re: ics m4 electrical problem

sounds like the motor is pushed to far up into the gears. Just unscrew the adjustment screw on the botton of the grip slowly until it firs ok, try that first.

[gezer]

Which way ?

[gezer]

Re: ics m4 electrical problem

Which way ?

[tsv2tuff]

Re: ics m4 electrical problem

anti clockwise is the way to turn the adjustment to loosen the motor height. other thing to ask is are you using a ics motor?

[wozza]

Re: ics m4 electrical problem

Lefty Loosey............Righty Tighty.

[gezer]

Using a Ics motor but it was way worse

[gezer]

What should I hear ?

[Gadge80]

Re: ics m4 electrical problem

Google is your friend dude... when I replaced my first ever motor (once upon a time) I found a nice helpful vid which helped with the fitting and also had sound too...

It's difficult for people to write what you should be hearing, but it goes a little like kzzsoooopzit... it's electronic, but not screechy... it's loud and crisp, but has a shoooooping sound in the middle.... hahaha.... just watch good ole Tube of You, I'm sure you'll find what you're looking for.

[gezer]

Thanks
Why do I always forget about YouTube

[gezer]

Re: ics m4 electrical problem

ok its not that as its still doing it

screetching stopped but it still stops altogether sometimes when i reach roughly half a mag

[XxB4K3RxX]

Re: ics m4 electrical problem

could be the mag not feeding

[gezer]

No its electrical

[XxB4K3RxX]

Re: ics m4 electrical problem

have you checked your wiring making sure it's not shorting?

[gezer]

Ye but nothing obviously wrong in the wiring