Motor not cycling consistently

[Jaeger90]

Can anybody help me out with an issue I encountered today.
I am using a G&G MP5A5, which, until today, has been absolutely flawless.
When I pull the trigger, every so often the motor will sound as though it has only half cycled, or just fire off once (as if the battery is about to die) , however, sometimes it will just act as normal.
What could be causing this?
Damaged wiring restricting current flow?

[XxB4K3RxX]

I had a simalar prob with as the motor would change pitch which I found to be the fuse and wiring which i removed and rewired. Could be your battery had it

[Jaeger90]

Re: Motor not cycling consistently

The battery is almost brand new, so I think you might be right about the wiring/fuse. I will give it a go...

[XxB4K3RxX]

I used 16awg cable and also try deans connectors on the battery