Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

My new Ares Tar 21 problem.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My new Ares Tar 21 problem.

    Hi All.

    So my TAR 21 turned up this morning and it is only shooting at about 220fps when it was quoted to shoot at 330.

    I tried a different spring in it in case that was the cause. Now the spring I tried was capable of shooting at way over 410fps but it still only managed to give the tar about 300/310 fps.

    So I have taken that spring out because I do not want the stress on the GB.

    Whats next? I know the previous owner has added an m16 TB and new hop rubber.
    im guessing theres a massive compression issue :

    Ideas?

  • #2
    Re: My new Ares Tar 21 problem.

    gap between the nozzle and the hop unit may be too big, causing loss of air flow when fired.

    Comment


    • #3
      Re: My new Ares Tar 21 problem.

      Check the hop rubber is intact, replace the o-ring
      Originally posted by Nun-Chuck
      I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
      Originally posted by deanfirst
      why not use zeroone's escort service?

      Comment


      • #4
        Re: My new Ares Tar 21 problem.

        Send it back and ask for another one. Its still in warranty and it is faulty out of the box.
        Get a new one mate.

        *wait screw that* I didnt see that it was 2nd hand. lol
        Last edited by 013753; 28 October, 2009, 09:56. Reason: wrong meaning
        CA & JP Rifles SPR (Upgraded)
        CA M4A1 SPC

        Comment


        • #5
          Re: My new Ares Tar 21 problem.

          Originally posted by Fizzy View Post
          Check the hop rubber is intact, replace the o-ring
          The o ring that pushes down the barrel and into the hop?

          Comment


          • #6
            Re: My new Ares Tar 21 problem.

            Also. the hop is built into the GB in the TAR.

            ..... hmmm

            Comment


            • #7
              Re: My new Ares Tar 21 problem.

              If these issues weren't declared, I'd speak to the guy who sold it to you, and see if he's willing to pay for repairs. Then send it to Z1 or such
              Originally posted by Nun-Chuck
              I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
              Originally posted by deanfirst
              why not use zeroone's escort service?

              Comment


              • #8
                Re: My new Ares Tar 21 problem.

                It's not a huge problem, when the TB and Hop were installed it probably wasn't done correctly and you have terrible compression. If not possibly the GB has bad compression, which (although not expensive) will set you back a bit more.

                It should be a simple fix, and just a service at 01 should sort it. The seller should be willing to pay half, or possibly the full cost of a service, but you should really expect that second hand guns may need a service, as they have had to go through transport or may not have been serviced previously etc.
                Old Feedback: http://forums.zeroin.co.uk/showthread.php?9500-TaylorB

                Comment


                • #9
                  Re: My new Ares Tar 21 problem.

                  Originally posted by Taylorb View Post
                  It's not a huge problem, when the TB and Hop were installed it probably wasn't done correctly and you have terrible compression. If not possibly the GB has bad compression, which (although not expensive) will set you back a bit more.

                  It should be a simple fix, and just a service at 01 should sort it. The seller should be willing to pay half, or possibly the full cost of a service, but you should really expect that second hand guns may need a service, as they have had to go through transport or may not have been serviced previously etc.

                  I have stripped many guns previously and done all the work myself so I think I will take it apart this evening and have a little play Hopfully its just put together wrong or the gearbox is clogged with turd grease.

                  Comment


                  • #10
                    Re: My new Ares Tar 21 problem.

                    Yeh it's probably not a biggie

                    Good luck
                    Old Feedback: http://forums.zeroin.co.uk/showthread.php?9500-TaylorB

                    Comment

                    About the Author

                    Collapse

                    sniper34d Find out more about sniper34d
                    Working...
                    X