Cyma AK gearbox

[big-chris]

Hey guys I recently acquired a cyma ak74.
It has a madbull python inner barrel and guarder clear hop rubber.
I have £100 to spend on the gearbox internals, what do you suggest would be the best upgrades??

Cheers
Chris

[richj]

Re: Cyma AK gearbox

Hi,

Maybe slightly over by a few coins but:

Prowin Blue CNC Hop Unit
Guarder V3 Cylinder / Airseal Kit (Piston,PH, Cylinder, CH, AN)
Prometheus Purple Hop Rubber and Nub
G&P M160 Short Motor

Rich

[happyal]

Re: Cyma AK gearbox

Because you have already done the barrel and the hopup rubber I would use it until something breaks.

Nothing wrong with Cyma AK internals so you should be OK for a while.

[Ian IWG]

Re: Cyma AK gearbox

Nothing unless there is something wrong with it. If it's firing hot and you need to fit a new spring then yer do some upgrades, but until it breaks my advice would be save your money and run it till you need to upgrade IMHO. I've run my Cyma AK for 3-4 years with out a problem only fitted a tight bore and TM hp rubber.

[Ian IWG]

Re: Cyma AK gearbox

Ninja'd sorry for repeating guys.

[laurence]

Re: Cyma AK gearbox

Get the SHS High speed full tune up kit for AK's, its a really good kit and has everything in it that you need really, and is only about £25 so a pretty good deal pm me if you want a link to it. Also, possibly a SHS ultra high torque motor and then your pretty much set for everything.