Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Hi-Capa Gas Leak - Around Hammer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hi-Capa Gas Leak - Around Hammer

    Picked up a new hi-capa today and ran into a problem.

    Gas seems to pour out the rear of the gun around the hammer, leaving a lot of liquid.

    I've tested it with another mag and it ran perfectly fine so I'll assume it's the mag.

    Any ideas? The seals the most likely candidate?
    sigpic

  • #2
    Re: Hi-Capa Gas Leak - Around Hammer

    Ok so I tested the dodgy mag again and it resulted in the same problem, came back in and posted this. Went out and tested the mag again to be sure and now it's working fine with no gas escaping around the hammer.
    sigpic

    Comment


    • #3
      Re: Hi-Capa Gas Leak - Around Hammer

      check the piston lid.
      green gas or propane?
      sigpic

      Comment


      • #4
        Re: Hi-Capa Gas Leak - Around Hammer

        Actually, let me check that.
        It's "Green Power Gas"
        Last edited by iliekpie; 20 September, 2012, 14:08.
        sigpic

        Comment


        • #5
          Re: Hi-Capa Gas Leak - Around Hammer

          Just an update, ran another few mags worth through it and it's working fine now. Dirt in the seal, something misaligned or whatnot.
          sigpic

          Comment


          • #6
            Re: Hi-Capa Gas Leak - Around Hammer

            Probably been stored either with a dry gas for a while or no gas, it was more than likely the flow valve sticking slightly causing excess gas to leak.
            section 24 of the 1968 Act
            Supplying imitation firearms to minors
            1)It is an offence for a person under the age of eighteen to purchase an imitation firearm
            2)It is an offence to sell an imitation firearm to a person under the age of eighteen.

            Comment

            About the Author

            Collapse

            iliekpie Find out more about iliekpie
            Working...
            X