BELL EG723 (1911) firing issue

[Utorak]

Hey guys, (feeding issue)

I bought this pistol off of the site about a year ago, (I can't recall how many owners it had prior to my purchase) and soon after had to stop due to my site closing down. Next month I will be starting back up again at a new site, and so today I decided to go through my gear and check how everything Is. I came across my 1911 and realised it has a feeding issue, I demonstrate it in the link below. I really have no idea about fixing internal parts on GBB so I'm at a loss.

Link: http://www.youtube.com/watch?v=ZQ1nNG-zGnI

Here are two pictures of the internals.


and


I would greatly appreciate any help.

-Utorak

[Utorak]

Re: BELL EG723 (1911) firing issue

I forgot to say that this is not a magazine issue, unless all 3 of my mags are having issues!

[SgT BULLETPR00F]

Re: BELL EG723 (1911) firing issue

What exactly is the feeding issue? Do the bbs not load into the chamber or do they load and then just roll out the chamber or what? Need a beeeter description fella.

[Utorak]

Re: BELL EG723 (1911) firing issue

Apologies, I thought the video would suffice. The bb's seem to stop the slide from going forward all the way, as demonstrated in the video.

[Utorak]

Re: BELL EG723 (1911) firing issue

Problem solved! The previous owner failed to inform me of a broken piece of plastic.. Thanks. Can these parts be replaced with metal ones?

[seansamurai1]

Re: BELL EG723 (1911) firing issue

Nope.

They are cheap enough though, get a reinforced version instead.