Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Gas Mag Lubrication

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Gas Mag Lubrication

    Hi all,
    I have a number of GBB guns including a USP and MP7 and I'm a little confused of gas mag seal lubrication.

    I'm keen to keep the hops in my guns free from silicone oil to keep them from swelling so at the moment I use abbey brut gas. However, I'm also aware that the internal seals and orings will over time dry out.

    My question is how do I keep a good balance between the internal seals staying oiled whilst keeping too much oil from wrecking the gun?

    Cheers all!!
    sigpic
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Gas Mag Lubrication

    You want to keep your seals free of mineral oil, airsoft gas already contains lubricant, shouldn't have to do much else to the mag seals- just keep the mags slightly gassed... Might pay to occasionally lube up the top seal though.
    Originally posted by Walter Gropius
    If your contribution has been vital there will always be somebody to pick up where you left off, and that will be your claim to immortality.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Gas Mag Lubrication

      Bit of thicker oil smeared over the top of the mag seals works for me (excess wiped off so that it doesnt mess with the hop)
      Shadow Stalkers Airsoft Team
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      sonicninja Find out more about sonicninja
      Working...
      X