Kwa Mp9 barrel dissemble?

[Codeone]

Hello there having some issues with getting
The inner barrel out of the outter barrel
Only want to change the hop rubber
Any help please

[Mace]

There is a tiny grub screw hidden inside the moulding on the top of the outer barrel where the pin drops in to hold the u clip near the front of the gun. Hope that makes sense. Once removed it will come out but it's quite stiff. Make sure you note where all the hop components line up on the outer barrel before you take it apart. Don't lose the tiny ball bearing which controls the hop and sits on top.

Have fun!


Sent from my iPhone using Tapatalk

[dave38x]

Re: Kwa Mp9 barrel dissemble?

If you do lose it buy 10 2.5mm stainless steel ball bearings off ebay for less than 2 quid, you'll never run out!