KSC GBB Glock 23F Problems

[Cez]

hi there.
i have a second hand G23F but im having massive problems.
every time i fill the mag, everything goes in fine and there is no leakage from the valves. but when i fire the whole mag vents and the power drops significantly. It wont blow all the way back either.
Once or twice when fired the slide flew off whilst being properly fitted.
there is a crack in the slide but im not sure if this should be causing all this greif:
<a href="http://s198.photobucket.com/albums/aa61/CezAoD/?action=view&current=100_0655.jpg" target="_blank"><img src="http://i198.photobucket.com/albums/aa61/CezAoD/100_0655.jpg" border="0" alt="Photobucket"></a>

[jagillham]

Re: KSC GBB Glock 23F Problems

Fixed that image for you

[amandla36]

Re: KSC GBB Glock 23F Problems

Try putting some silicon oil into the release valve, that might help with the venting. Not sure about the slide flying off.

[Cez]

Re: KSC GBB Glock 23F Problems

haha, thanks for fixing the image.
and when you press the valve it stops like normal but when its shot it has the problem....

[TaNgO XP]

Re: KSC GBB Glock 23F Problems

got the same problem but with a glock 18c i sorta fixed it though i was using a plastic slide and it couldnt take green gas
so im using a metal one now and its fine!
not sure bout the venting could be too cold?

[guard-sniper87]

Re: KSC GBB Glock 23F Problems

with the slide fyling off when the trigger is pulled ,

the slide is broken , replace with a metal slide and it will be fine

using green gas in it weakens the plastic guide rails and they break after a while

with the venting . this will stop when the new slide and valves are re lubed