TM P226

[Jack.Murnin]

Ok guys, There is nothing actually wrong with the gun, it's just that I am now almost down as having this as my one and only pistol (Well I have two of them ), And want to know what upgrades I can get for the pair.

Im not sure about Gaurder Full Metal kits as I heard these make them shoot horribly, but besides that what can I do to it? I'd also like a bit of detail, such as the best brands etc. It already has a 150% Recoil Spring and I'm looking at hammer springs as we speak. Any help would be appreciated.

Thanks Guys!

[Doombull3t]

Re: TM P226

gaurder metal kits are gorgeous mate, whoever told you they shoot shit is lying! mags need shimming, high flow valves, upgraded lip seals, TB barrel and Upgrade the Hop rubber and you'll be sorted

[Stones]

Re: TM P226

I got a WE 226 literally about 20 minutes ago from zero one. I was scared at first as the mag was only firing about 5 or 6 shots and then pfffffft! seems it was my gas running out!

i've just noticed it has SEAL TEAM SIX engraved on the right sight of the grip....

[Panda]

Re: TM P226

Right then....the recommended are:

Tightbore barrel
Nineball Gas Routers for your mags
Nineball hop rubber
piston head

[Kingluke23]

@stones....gas it vertically. Gas it again. Then again and again. Try it out. Lot of people dont fully gas the mags

Sent from my GT-I9300 using Tapatalk 2

[Stones]

Re: TM P226

Right then....the recommended are:

Tightbore barrel
Nineball Gas Routers for your mags
Nineball hop rubber
piston head

and Lee precision shims.

[a_flea]

Re: TM P226

I have:
-the guarder kit
-150% recoil spring
-6.03 barrel
-nineball hf valves
-standard routers
-original hop/rubber
-no uprated hammer spring installed

and it runs fast, accurate and more than powerful enough for cq at around 300-305fps...

Whoever said that about the guarder kit either didn't install it properly or had another issue.

[tisane]

and Lee precision shims.

Not recommended alongside the Nineball routers, they are slightly raised as it is, shims and routers I found held the nozzle way too tight.

[Stones]

Re: TM P226

seemed to work pretty well in my kjw 299. Any one have any idea if the WE will take TM parts at all?

[tisane]

Maybe the tolerances are different between KJW and TM.

[Stones]

Re: TM P226

possibly, but I was under the impression the KJWorks P22*'s were clones of the TM ones.