Glock- BBs not moving into barrel from mag

[Half Trigger]

Hey guys, picked up a problematic Glock 26, believe its a KSC but not sure.
The guns shoots fine without any BBs in it. Infact it sounds insanely nice.
The gun is full auto and semi auto, so if anyone knows what make its likely to be let me know please!
But anyway that's not what this threads about.

Ok so, I'll just describe the problem:

Without BBs:

BBs ready to be loaded:


And then this is what happens when the slide is moved forward to load the bb:

The BBs don't move up into the barrel, just sit just outside the magazine:


Anyone any idea why this is and what I can do..?
I silicone sprayed the path to the chamber to reduce friction, but doesn't appear to be the solution as the problem continues.

Many thanks for any help guys,

Phil


Sent from my iPhone using Tapatalk

[Sidewinderforge]

Re: Glock- BBs not moving into barrel from mag

Is there a small plastic 'nub' sticking out under the nozzle? Can't tell in your pics as the angle is wrong.

SAS

[Half Trigger]

I hope my rapidly taken photos are what you need. I don't think I see a spike in the nozzle, but I'll see what you think
Thanks for the reply!

Phil


Sent from my iPhone using Tapatalk

[kee_wee]

Well looking at that it looks to me like the nozzle is broke, the part that pushes the BB's should be longer then in your picture to actually force the BB into the hop. You can buy a new nozzle for a few quid from somewhere or borrow someones just to check but im pretty sure thats why.

[Sidewinderforge]

Re: Glock- BBs not moving into barrel from mag

Yup, in the 1st pic the square section below the nozzle should protrude further forward, flush with the face of the nozzle itself.

See this pic for what it should be like:
loading nozzle.jpg

SAS

[Apurturesci]

Re: Glock- BBs not moving into barrel from mag

Yeah, nozzle is broken. Luckily you can get new ones for under £7 in the UK.

[Half Trigger]

Indeed that does seem to be the issue!
Thank you very much for the replys, youv sorted the problem already! I'll buy the part fit it and update you both on the outcome!

Thank you.

Now just to find out what make the gun is so I know what make part to buy... :/


Sent from my iPhone using Tapatalk

[Sidewinderforge]

Re: Glock- BBs not moving into barrel from mag

[Yoda] KWA/KSC compatible parts you need [/Yoda]

SAS

[Half Trigger]

How do you know that if you don't mind me asking?


Sent from my iPhone using Tapatalk

[Sidewinderforge]

Re: Glock- BBs not moving into barrel from mag

The serrated HOP adjust ring, 'DEA147' next to the eject port & it doesn't look internally like my Army R17 which is a TM clone.

SAS

[Half Trigger]

Cool, thanks ill order a KSC/KWA Glock nozzle and see how things go, thank you all for the help, youv been great :D


Sent from my iPhone using Tapatalk

[Sidewinderforge]

Re: Glock- BBs not moving into barrel from mag

If you take yours out and compare to pics you find online (like the one i posted above) you should be ok.

SAS

[Apurturesci]

Re: Glock- BBs not moving into barrel from mag

Replied to your PM. Yeah defiantly a KSC or KWA. Pretty much the same really.