ksc p226 venting issues

[UnholyGIT]

hey guys

have a slight issue with my p226 its nearly brand new and only been to two games

it will fire the first magazine semi fine with no real issues
second magazine through it seems to start almost sticking and sometimes it will almost go fully auto for a few shots ive run out of bbs so am just checking it atm
thrid mag will nearly always vent all its gas out the front of the gun
and it just keeps doing it till it gets time to cool down


i sent it back to where i brought it because it did it within the warranty and they sent it back saying it was fine even tho i know for a fact they had changed the magazine as the original one had a slight chip on the bottom were i accidentally dropped it the first day i got it, they told me to use guarder blue gas and it will be fine, having not been airsofting in a while i ddint try it when i got it back and its now out of warranty

any thoughts on how to fix this issue?

[Half Trigger]

Does sound like its just due to the cold weather at the moment and that with its metal slide, gets particularly cold.
But it shouldn't happen really..

I would advice maybe stripping the top slide and give it a good clean and re-grease...

[UnholyGIT]

Re: ksc p226 venting issues

its got a plastic slide on it and the slide is always fully functional

[Half Trigger]

My bad read incorrectly, thought you said it was KJW.
Get someone else's opinion, I'm not the best person to answer ;')

[UnholyGIT]

Re: ksc p226 venting issues

no worries ty for your imput bud

[UnholyGIT]

Re: ksc p226 venting issues

still doing it ><!