help...kwa/ksc feeding prob.

[cromm1066]

hi have a glock 18c all was working fine now load a mag pull back slide boom bb gone pull triger again boom no bb you have to pull slide back again to load a bb then boom bb gone pls help my baby.

[BB_Hose]

Re: help...kwa/ksc feeding prob.

First check your nozzle/barrel ramp if there's a chipped/snapped feeder. Second does the shot sound weak? As in does it sound like it doesn't have enough power to cock it?

[loki7491]

Re: help...kwa/ksc feeding prob.

If it picks up a BB when you cock it by hand but not when you fire it it has to be down to the travel of the slide.

As BB_Hose said, it sounds like you are not getting enough recoil of the top slide to take it back far enough to collect a new round.

Have you fitted a stronger recoil spring or a weaker hammer spring?
Are you using the same gas you always use?
Have you cleaned and lubed the runners of the top slide recently?
Do you have another magazine to try? The issue could be with the valve on your mag not releasing enough gas.