Maruzen Mac 11 help

[Jumping scotty]

I need help with disasembling this gun and fixing a sticky bolt. Basically i was trying to disassemble the gun and the best guide i could find was for a KWA mac 11 where you have to twist the bolt around but in doing this the bolt now sticks and doesn't function as smoothly(very sluggish).
How do i fix this?

[Jumping scotty]

Re: Maruzen Mac 11 help

disassembly problem solved, just need to know about the bolt and how to re-tighten it

[Jumping scotty]

Re: Maruzen Mac 11 help

UPDATE!

The gun now fires fine when pointing downwards but won't cycle when pointed horizontally or upwards...

Help would be lush :D

[bagafett]

Re: Maruzen Mac 11 help

There is a problem with the way the thread is tapped in the back of the bolt, If you undo the screw put in a dab of thread lock then do it back up to almost tight this will stop the loading nozzle from sticking up and not running true.

Basicly screw it in untill the nozzel starts to lift, then backit off untill it's level.

Hope that helps.