Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

i have a problem with tm P226 mags

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    i have a problem with tm P226 mags

    both of my P226's mags are leaking gas in the same spot on both (shown on pics below). one it's too bad but it dose leak but the other one, as quick as you put the gas in, it leaks out.

    can someone help me with this


    Santa *creepy kiss* xXx
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: i have a problem with tm P226 mags

    take the bottom plate off and put some silicone grease on the o ring.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: i have a problem with tm P226 mags

      have you tried tightening the screw that holds that section of the mag in place.
      modified m16 marksmans rifle
      m4 full stock
      ca m203 3x shells
      ca870
      ksc glock 17 with m3 laser
      ics mp5 silenced, cheers markybobs
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: i have a problem with tm P226 mags

        thanks guys
        Santa *creepy kiss* xXx
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        santa i take the 2 most dangeruss elements known to man and make them work for me.......and a posable bomb Find out more about santa
        Working...
        X