KWC Glock, doesnt fire?

[reflexsnipe]

I fill the mag up with gas, put it in the gun. I pull the trigger, and all I hear is a faint pop, and the gun doesn't fire?
Please help :S

Tom

[jagillham]

Re: KWC Glock, doesnt fire?

Some kind of hammer issue probably. What happens if you pull the trigger again?

[bristol_bb4]

Re: KWC Glock, doesnt fire?

you sure the mag isnt leaking? take the slide off and manually push the hammer back and then pull the trigger, see how far it snaps forward, may be something obstructing it

[jagillham]

Re: KWC Glock, doesnt fire?

^ Do above with mag removed!!!!

[bristol_bb4]

Re: KWC Glock, doesnt fire?

you can only remove the slide with the mag removed anyway IIRC

[guard-sniper87]

Re: KWC Glock, doesnt fire?

could be a number of things

dust grit or mud in hammer spring
recoil springs died
gas engine faulty
the tiny recoil springs for the gas block are worn ,
stricker plate/ hammer plate , worn

[jagillham]

Re: KWC Glock, doesnt fire?

you can only remove the slide with the mag removed anyway IIRC

That is true, but if the put the mag back in, it would release the whole mag of gas upwards! :eek:

[bristol_bb4]

Re: KWC Glock, doesnt fire?

sorry mate i didnt think until id clicked post! i just pulled the trigger on mine without having the slide on and mag installed, awesome jet of gas haha :D

try all of the above mentioned mate, you'll get to the bottom of it, oh, push the gas release valve on the mag to make sure it moves freely, might have some dirt in there

[magic_golem]

Re: KWC Glock, doesnt fire?

good job you werent smoking when you did that lol! :P

[Renni 95]

Re: KWC Glock, doesnt fire?

good job you werent smoking when you did that lol! :P

now that would be a story to explain to your boss why you have a lack of eyebrows

[bristol_bb4]

Re: KWC Glock, doesnt fire?

haha last two posts cracked me up :D

back on topic briefly lol...also check the top of the mag, where the gas comes out, make sure its clear of dirt/damage. little things like that can be over looked

[jonny lovegrove]

Re: KWC Glock, doesnt fire?

what model of glock?

[jagillham]

Re: KWC Glock, doesnt fire?

Exactly same issue with mine, it's part #78 snapped.

By putting in the mag without cocking the gun first, this part breaks off after a while. Stops the hammer working correctly!