Upgrades to my m14

[burgecoco]

Im trying to upgrade my we m14's range. I know there is a WE Custom 500 FPS Upgraded Nozzle for WE M14 Gas Blowback Rifle in the states, I was wondering if there was some where in the uk I could get this part? And is there anything else I could do to improve the guns performance.

Sent from my Sony Tablet S using Tapatalk

[loki7491]

Re: Upgrades to my m14

You can make your own nozzle do that kidder, for free!

I have a WE M14 over hopping 0.3s at 65 meters and is running at 445fps on a 0.2.

How good are you at pulling guns apart - more importantly, how good are you at putting them back together?

[burgecoco]

Re: Upgrades to my m14

You can make your own nozzle do that kidder, for free!

I have a WE M14 over hopping 0.3s at 65 meters and is running at 445fps on a 0.2.

How good are you at pulling guns apart - more importantly, how good are you at putting them back together?

How do you do that?

Sent from my Sony Tablet S using Tapatalk

[loki7491]

Re: Upgrades to my m14

Inside your gun is the bolt.
Inside that is the air nozzle.
The air nozzle comes apart into 2 bits.
Inside the air nozzle there is a valve (normally replaced with NPAS), a spring and on the back section, 2 protruding tabs.
Shave these tabs down to approx 1.5 - 2mm with a craft knife (good, square cuts)

This is not an exact science, which is why you should also fit an NPAS at the same time for fine tuning.

Find a stripping video on YT as it will take FOREVER to describe!!!!

[burgecoco]

Re: Upgrades to my m14

Thank you.

Sent from my Sony Tablet S using Tapatalk