GHK AK Hop Problems

[JFarrow]

I've been trying to adjust my hop for a while and the hop wheel appears to be stuck in one position, I couldnt move it with my fingers so I tried some light pressure with a flathead screwdriver, still wouldnt budge. I took the entire gun apart to find that the bolt/hop face screws were not screwing back in properly due to misalignment, when solving the misalignment the hop wheel can not be turned at all and it appears that there is no contact between the bucking and the hop. My main outlook now is to buy either the A+ or the RA Tech hop systems to just eradicate the problems entirely.

[johnnyj]

Re: GHK AK Hop Problems

Have you removed the outer barrel ? If its in too far to the body this can put pressure on the hop , just back it out a turn or two and see if it makes a difference to the wheel moving

[JFarrow]

Re: GHK AK Hop Problems

Ah right I'll have a look and let you know how I get on

[JFarrow]

Re: GHK AK Hop Problems

It appears to be sorted, I'll test the hop soon. THANKS!!!!