Help identify this USP

[ImplodedHamster]

Hiya,

Recently picked up a USP of unknown make, could you help me identify what make it is?
Pics are here: http://s1236.photobucket.com/user/Im...?sort=4&page=1

Going of the markings I guessed it was KSC, but the mags don't look right for it... Any ideas?

Thanks!

[BringOnThunder]

Help identify this USP

My guess would be ksc pre system 7 usp, plastic slide and frame I presume?


Sent from my iPhone using Tapatalk

[ImplodedHamster]

Re: Help identify this USP

Sorry, forgot to mention. Frame is plastic. Slide and barrel are both metal.

[BringOnThunder]

Re: Help identify this USP

That rules pre system 7 out, to my knowledge they were all plastic frame and slide, there were after market kits made though.


Sent from my iPhone using Tapatalk

[blytm]

Re: Help identify this USP

That rules pre system 7 out, to my knowledge they were all plastic frame and slide, there were after market kits made though.


Sent from my iPhone using Tapatalk

You were correct. it is a Pre S7 model. They had metal slides. I had one too

[Ells]

Re: Help identify this USP

As blytm said, pre s7 had plastic barrel and metal slide, then moved to metal slide and plastic barrel for s7, the hop unit would also indicates kwa/ksc as well, i think?

[Apurturesci]

Re: Help identify this USP

As said, it's a pre S-7 KSC USP, easiest way to tell is the enclosed magazine. KSC made metal slides for them and sold them separately, and Taiwan models had them already installed.

[Danny_boy85]

Re: Help identify this USP

That's a Taiwan KSC USP that Is pre system 7.

Can tell from the mag and the nozzle.

[ImplodedHamster]

Re: Help identify this USP

Thanks
So for the next question, is there a easy way to load these mags? So far I've been putting the BBs in 1 by 1 as I can't see a way to pull the follower down.

[Apurturesci]

Re: Help identify this USP

Thanks
So for the next question, is there a easy way to load these mags? So far I've been putting the BBs in 1 by 1 as I can't see a way to pull the follower down.

There isn't any other way to load them on the older KSCs, which is why they moved to the open magazine design in the newer guns.

[ImplodedHamster]

Re: Help identify this USP

Is System 7 the same as NS2?
I'm currently looking for some spare parts (the bits on the mag that push the slide catch), so does 'pre system 7' have a name? or do I just search for that?

[BringOnThunder]

Re: Help identify this USP

Yes system 7 and ns2 are the same, just search for pre system 7.


Sent from my iPhone using Tapatalk

[ImplodedHamster]

Re: Help identify this USP

Thank you all

Now I just need to find somewhere to get parts....

[seven9zero]

Re: Help identify this USP

I have been ordering parts for mine direct from KWA. All done by email direct from the site.

[ImplodedHamster]

Re: Help identify this USP

Do they hold KSC parts too? Or do you find the equivalent kwa parts?