Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Replacing Forearm on Marui M870

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Replacing Forearm on Marui M870

    Hey guys im looking at replacing the forearm on my Marui M870 for the G&P Forearm Type A Full rail.
    Has anyone had any success replacing this? It looks from the front quite an easy job, just unscrew the front cap on the magazine tube, then unscrew the screw attaching the magazine tube to the barrel, and slide off from the front. However after watching maple leaves video he says he tried it this way and it was VERY difficult. So im wondering how people have gone about doing it?

    Many thanks
    Phil
    Recoils: TM MK18 / TM Recce / TM G36K / TM AK102
    Rifles: G&P LMT MRP
    Shotguns: TM M870 / TM M3 / G&P Sheriff 870 / Madbul AGX Tan
    Pistols: TM; Sig P226, Hi Capa Extreme x2, 1911 MEU / KWA; USP.45, M226, Glock 26, USP-c x2 / KJW 1911
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Replacing Forearm on Marui M870

    If your putting on the one made for the TM you actually have to disassemble most of the shotgun to get to do it.

    It's not that bad, a couple of springs held in by the body which will pop out.
    Zeroin - Come for the airsoft. Stay for the trolling.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    Previous template Next

    About the Author

    Collapse
    Half Trigger Find out more about Half Trigger
    Working...
    X