we 416 ra tech trigger issues

[darnage]

Hi

I have installed the ra tech trigger box, the whole assembly jobby the issue in having that when u put it all back together and insert the fire selector it stays on semi only. I am unable to select safe or FA. feels like something is jamming it. I've watched youtube vids and I'm sure I've re built correctly. Is there a known compatibility issue on this? Tried Google fu come back with zilch

Cheers.

[Heinz]

Re: we 416 ra tech trigger issues

Work by method of elimination. First off, swap the hammer, trigger, disconnector and auto latch (along with their related springs) into the stock WE trigger box, then get back to us after you've tested it.

[darnage]

Re: we 416 ra tech trigger issues

I would if i dared. I bought the whole drop in box so i didn't have to open up the trigger mech.

[Heinz]

Re: we 416 ra tech trigger issues

Stuck between a bit of a rock and a hard place then. If you bought it in the UK, have you raised the issue with the retailer?

[Aleeeexander]

Re: we 416 ra tech trigger issues

Are you sure about the detent spring of the safety was installed right? Remove the pistol grip reveals the spring. Also, check the detent as well.