Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

KSC P226R Mag Problem

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    KSC P226R Mag Problem

    I have a brand new KSC P226 (Full-Metal). I'm putting some rounds through to test but I'm getting the mag discharging its gas completely every so often (before the mag is empty). Is this just bedding-in or is there something more serious afoot?

    Tested on two mags and both the same.
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: KSC P226R Mag Problem

    Just ran a mag through three times rapid on Green without any undue expulsions - so I can only assume the previous poor results were due to 134a gas cool-down? Is 134a more prone to this than Green?
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    Previous template Next

    About the Author

    Collapse
    Panoptes Gunnoisseur [n] pron: ['gun-uh-sur', -soor'] [Purveyor of fine taste in firearms]. Find out more about Panoptes
    Working...
    X