TM Glock 17 Stoppage/jamming problem Vids/pics

[fish6634]

Hi All

I am hoping someone can help with with an issuw i have with my tm glock 17

I bought it secondhand and everything seems good with it apart from one issue, i can be firing and the slide will jam in the back position. Its sort of like when i locks back when the mag is empty but there are still bb's in the mag. Sometimes i can re-rack the slide and it will carry on cycling (like in one of the vids) sometimes it gets jammed and i have to use a tool to flick the little nub that is attached to the trigger bar to get the slide to return forward.

Hope this makes sense along with the photos and video links

Thanks





https://www.youtube.com/watch?v=qqC5bTCWdLQ
https://www.youtube.com/watch?v=6riBLcAdd08

[Sidneyious]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

Take the slide off and see if it has this piece that on mine is blue.
Make sure the spring guide is in right.

[fish6634]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

hi mate

yes its the same as yours, whether its worn or something i dont know.

very annoying because its a great pistol

[Boo-Sabum Ben]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

When it jams, is the slide release raised?

[fish6634]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

No mate. When it's jammed the slide release does nothing it's a though it's jammed further forward

Sent from my SM-G920F using Tapatalk

[Sidneyious]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

Let's get more pics of the slide and dust cover.

[fish6634]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics






Sent from my SM-G920F using Tapatalk

[Boo-Sabum Ben]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

Sounds like the spring for the nozzle is catching, and creating friction for the slide. Happened with my 34 a bit. Next time it happens, see if the nozzle is firmly in place or if it still springs back and forward whilst jammed

[fish6634]

Re: TM Glock 17 Stoppage/jamming problem Vids/pics

I just stripped it and I look at the spring in the blow back unit. Is.it right it just sits in the groove with nothing as such to hold it in place?

Sent from my SM-G920F using Tapatalk