Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

WE 1911 upgrades

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WE 1911 upgrades

    im looking for place to get the part to replace the barrel and hop up. I am looking for PDI 6.01 barrel and a nineball hop rubber. If not something close to that and is there any other parts il need to change i have done the mag mods
    When the pin is pulled, Mr. Grenade is not your Friend!!!

  • #2
    Re: WE 1911 upgrades

    Hi mate, the whole upper slide internals are compatible with TM - Look for TM 1911 upgrades inside the slide (no pun intended!)

    Comment


    • #3
      Re: WE 1911 upgrades

      i know that is can use TM parts looking for a place to get them from any how like the review you did on the 1911
      When the pin is pulled, Mr. Grenade is not your Friend!!!

      Comment


      • #4
        Re: WE 1911 upgrades

        Oh right. - Look on asian websites, a hint would be a hobbyist with an E in asia. A bad riddle, but easy to figure out.

        Comment


        • #5
          Re: WE 1911 upgrades

          would a firefly hop rubber do the job ?
          When the pin is pulled, Mr. Grenade is not your Friend!!!

          Comment


          • #6
            Re: WE 1911 upgrades

            I'd go for a 6.03 myself, and not bother with the nine ball rubber. With a 6.01 and a nineball rubber you are at risk of going over 350fps (assuming this is your site limit for pistols).

            My otherwise stock TM 1911 (which should be roughly the same stock fps as WE) does 340-45fps with a 6.03 TB installed, at room temperature.

            Can't remember where, but I've seen grouping comparisons of 6.03 vs. 6.01, whilst 6.01 provided more power, better groupings were achieved with the .03.

            Any rubber should do fine, although some of them can be quite expensive for what you get. See if you can find a stock TM one, if you aren't happy with the WE's rubber.

            An you should be able to get it all from ehobbyasia.
            feedback: http://www.zeroin.co.uk/showthread.php?t=15176

            Comment


            • #7
              Re: WE 1911 upgrades

              "a hint would be a hobbyist with an E in asia"
              "An you should be able to get it all from ehobbyasia."
              Well..... yep.....

              Comment


              • #8
                Re: WE 1911 upgrades

                I find this skirt-around-the-name-whilst-giving-as-many-hints-as-possible routine very tiresome.
                Just go out and say it
                feedback: http://www.zeroin.co.uk/showthread.php?t=15176

                Comment


                • #9
                  Re: WE 1911 upgrades

                  I love getting infractions from Steve :D'

                  But, yeah - Whatever then. - 6.01 is not worth it, too much cleaning and a risk of getting way over 350fps.

                  Comment


                  • #10
                    Re: WE 1911 upgrades

                    ok thanks if thats the case what about the madbull 6.03 ?
                    When the pin is pulled, Mr. Grenade is not your Friend!!!

                    Comment


                    • #11
                      Re: WE 1911 upgrades

                      Should be good. Their AEG barrels are supposed to be excellent - go for it.
                      feedback: http://www.zeroin.co.uk/showthread.php?t=15176

                      Comment

                      About the Author

                      Collapse

                      goldeye101 Find out more about goldeye101
                      Working...
                      X