Hfc m190 only venting tiny amount if gas

[Slicke36]

Evening guys need abit of help

Just replaced my trigger spring in the m190 and after watching a youtube video of how to rest all yhe other springs I have now run into a problem.

I put the mag in pull the trier and it vents a tiny amount of gas (pop) not enough to fire a bb let alone recock the slide.

Now at a guess the hammer part which hits the gas hasn't got enough ummph in it to press the valve down.

I have another M9 and this works fine and looking at the insides of this it all matches up.

So any help would be great.

Cheers

Dan

[Slicke36]

Re: Hfc m190 only venting tiny amount if gas

Fixed. Hadn't reset the trigger spring in the correct place. All working fine now.