Smg 8 questions

[chaz_r33_gtr]

Re: Smg 8 questions

I'm looking at possible metal 3d printed backplate as the oem one seems to fail when using full auto on hpa. It fractures in lots of places and ends up having free play between the inner and outer and then that causes plastic body to crack by the pin holes. Will keep ya posted


Sent from my SM-G903F using Tapatalk

[chaz_r33_gtr]

Re: Smg 8 questions

Ahh..yeah..I had to file my hammer!. Cheers for reply and yup later versions of smg8 are same internally as the new wave small rice / we mp7

Sent from my SM-G903F using Tapatalk

[richw]

Re: Smg 8 questions

I was half dead when I wrote that and for some reason thinking of the MP7's which I believe the internals are very similar.

There was an issue with the MP7's that the trigger on semi wasn't the best and if you filed part of the hammer it fixed the issue. It looks like WE changed the molds to fix the issue.

[chaz_r33_gtr]

Re: Smg 8 questions

What do you mean about molded hammers? Curious to know. Yeah 410 was hot but was just an experiment. Not exactly practical a pistol with a barrel that long!

Sent from my SM-G903F using Tapatalk

[richw]

Re: Smg 8 questions

I recently got one myself, I think WE have revised bits - my hammer looks a little different from the modd'ed ones so don't think that needs addressing. Not sure what the hop is like though..

[minisam92]

Re: Smg 8 questions

410 would be a bit too hot for what I'm hoping for but thanks for your advice buddy

[chaz_r33_gtr]

Re: Smg 8 questions

Can you get a power up suppressor for one of these
Also what internal upgrades would poeple recommend
Thanks
Sam

Just fit a longer inner barrel to get more power and fit any suppressor you like. Experiments I done on my 1911 pistol took it to 410fps with a ridiculously long 330mm barely whilst changing nothing else

Sent from my SM-G903F using Tapatalk

[minisam92]

Can you get a power up suppressor for one of these
Also what internal upgrades would poeple recommend
Thanks
Sam