TM M92F Trigger issue.

[Teddykiller]

Hey all,

I will be listing the part numbers where I am having the issue, the parts highlighted in blue on the picture included are the ones I am having trouble with.

Okay, I have recently had an issue with my Tokyo Marui M92F in which the trigger mechanism will no longer work correctly. For instance, if I press the Part '92B-63' upwards then the trigger mechanism works fine, however if I leave it as it is without pressure, then it simply drops and the hammer is still locked back.

It is as if it is permenantly stuck on 'Safety', also part '92B-64' which seems to be the spring that supports it has little effect.

If anyone has any advice on this for me, it would be greatly appreciated as it is the Tokyo Marui M92F 'Samurai Edge' Pistol and has been a loyal and well used side arm.

Thanks.

[ste887]

Re: TM M92F Trigger issue.

right geta paper clip and fold it into the way shown on the diagram.
the safety works by moving the firing leaver you talk about pushing down.
you can replace it with a paperclip folded correctally