KWA Kriss Vector Firing Full Auto On 2 Burst

[ArcticVector]

Recently received a KWA Kriss Vector, it fires perfectly except that in 2 burst it only fires full auto.

I have stripped it down to the trigger bar and can't notice any damage or bending.

Anybody have any idea what could be causing this issue?
Thanks.

[StargateP90]

Re: KWA Kriss Vector Firing Full Auto On 2 Burst

Need a new burst sear. Absolutely pita to fit. Available from KWA Direct

[Jasont21]

Re: KWA Kriss Vector Firing Full Auto On 2 Burst

you reckon you can still source parts from the vector from them?

- - - Updated - - -

Even if you can't.. (i didnt think you would be able to ) you can order one from rainbow8

https://www.rainbow8.com/products/burst-sear-part-no-35-for-kriss-vector-gbb

[ArcticVector]

Re: KWA Kriss Vector Firing Full Auto On 2 Burst

@StargateP90 Do you know which is the burst sear? Is it one of the 3 on springs when you take the trigger housing out or is it one of the metal pieces in beside the hammer?

Thanks for the response.

- - - Updated - - -

@Jasont21 Thanks for the help, I saw this piece when I was inspecting the trigger bar and it looked completely fine, like new. Do you still think it could be the issue?