Can all GBB's take CO2 Magazines?

[b_hazard]

Obviously the ones that can fit a CO2 mag, are they all suitable to use them? thx

also, anyone who uses them, can you give me some pro's and cons compared to using propane...

thx again, ben.

[barrett50carrott]

Re: Can all GBB's take CO2 Magazines?

I wouldnt use co2 in a TM because its plastic... It would break the slide

[b_hazard]

Re: Can all GBB's take CO2 Magazines?

does anyone use co2 mags?!!!

[Caveira]

Re: Can all GBB's take CO2 Magazines?

I've had a CO2 pistol and it was shooting at 500fps after being left in the snow for half an hour.

Equally, my GBBR can handle CO2 out of the box (or go to nearly 600fps on green in hot weather), but many expensive GBBRs need special bolts and seal kits.

The problem is the much higher pressure. You could well blow out the seals, or fracture the slide, unless you're running a specific CO2 set-up.

[Evilllamas]

Re: Can all GBB's take CO2 Magazines?

What type of normal gas is CO2 on par with- cos it seems allot more potent than simply Green Gas, or Even Red gas!

[b_hazard]

Re: Can all GBB's take CO2 Magazines?

interesting, so putting a co2 mag straight into a full metal kjw m9 isnt adviseable, or any full metal gbb?? so whats the pointy of them then?

[schony]

Re: Can all GBB's take CO2 Magazines?

I think the metal slides may take the pressure but the seals are a different story.

[oliver]

Re: Can all GBB's take CO2 Magazines?

What FPS would you expect from a completely standard WE Hi-Capa 5.1 using C02?

[mark1989]

Re: Can all GBB's take CO2 Magazines?

400-500 is average i think. Way to hot for a site and all you'll get out of it is a broken gun. Not really worth the hassle.

[Apurturesci]

Re: Can all GBB's take CO2 Magazines?

WE Hi-Capa 5.1 using C02?

We have good CO2 mags that average around 350, 400 at most