M9 issues

[Hellfish]

I replaced the recoil spring in my KJW M9 as the slide would not fully cycle. This sorted one issue out and now the pistol fires fine...except that after test firing one mag, the trigger has now gone what i canonly describe as slack.

After pulling the trigger, it stays pulled and does not return to allow another round to be fired. I suspect that, after a quick look at the exploded diagram, that the issue is with the trigger spring, but I'm not that up to speed on the ins and outs of GBB's.

Can anyone clarify?

Ta

[Danny_boy85]

Re: M9 issues

If the trigger is slack, theres a little coil spring on the right hand side under the right hand grip, ill see if i can find a picture for you. Check this hasnt come off or popped out of place