tm p226 loading nosel

[bigdogs]

i want to change my loading nosel on my tm p226 ,any know how to get the dam thing off :D

[mike]

Re: tm p226 loading nosel

First unscrew the 2 screws holding the blowback unit and rear sight in from inside the slide.

The BBU also clips into the slide so you'll need to widen the slide (i.e. gently widen the slide from the inside) and from the front of the BBU push it out. Be careful of the spring and follower that will spring out when the unit has dropped down a few mil (Will ping out from the loading nozzle side).

If there's nothing wrong with the loading nozzle drop me a PM and I'll take it off your hands once you've replaced it.

[bigdogs]

Re: tm p226 loading nosel

does the rear site need to come of before i pull apart to unclip the unit ,and how does the site come of ,i tried to slide it of but wont buj

[bigdogs]

Re: tm p226 loading nosel

sorted .thanks for the help