Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Removing feed Spring?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Removing feed Spring?

    Is there anyway to remove the feed spring for a tm m9 mag as it gets stopped by the metal frame or is it attached to the baseplate aswell???/
    sigpicLooking for a tk twist 364mm/363mm TBB
    Looking for dark earth magpul ladder rail covers (official or not)
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Taking off either the top or bottom will do it.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Removing feed Spring?

      How do i do that????
      sigpicLooking for a tk twist 364mm/363mm TBB
      Looking for dark earth magpul ladder rail covers (official or not)
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Remove the 2 pins either top or bottom, make sure the mag is empty.

        Does it not come out with the removal of the plastic base plate?
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: Removing feed Spring?

          Tis a metal base plate and doesn't come off
          sigpicLooking for a tk twist 364mm/363mm TBB
          Looking for dark earth magpul ladder rail covers (official or not)
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          Previous template Next

          About the Author

          Collapse
          M4 Matt Beginner airsofter Find out more about M4 Matt
          Working...
          X