GBB Mag fill nozzle

[Coldy]

The fill nozzle on my mag is not letting me fill the mag without leaking. Do i need a new nozzle or is there a fix? And where do you get replacement nozzles form?

Cheers

Coldy

[flatrajectory]

Re: GBB Mag fill nozzle

Most leaks from the fill valve are caused by dirt ingres or the `o` ring seal drying out through lack of use. 9 times out of ten the cure is to simply unsrew the valve from the base of the mag and give it a good squirt with silicone oil then re-fit. As a matter of fact I had this problem obout 30 minutes ago with a Glock magazine and fixed it in 5 minutes by the above method.
Hope this helps.